Firstly, ensure the area is clean and free from dust or greese.

Step 1	Straight from the pack, hold the entire sticker over the area you wish to apply it. Use a ruler or tape measure to get it straight then use small pieces of masking tape at the top to hold it in place.
Step 2	Apply a strip of masking tape over the full length of one of the sides, creating a hinge point.
Step 3	Remove the positioning stripes of tape from the top edge and flip the sticker over at the newly formed hinge. Peel back half of the backing paper to expose the adhesive.
Step 4	Flip the sticker back over being careful not to let the exposed adhesive touch the surface. Making use of a hard plastic squeegee (a keycard will suffice) and holding the sticker square, begin to apply using overlapping strokes from the centre to the top and bottom edges starting from the hinge point. Continue to apply by removing the remaining backing paper as you go.
Step 5	Wait at least 15 minutes then slowly and carefully remove the top layer along with the edge strip of masking tape.